History of the Slicom Group
The Slicom family group was created by Thierry ONDET who is the principal shareholder.
1995: Creation of SLICOM (Engineering Industry Laser Sandblasting)
Thierry Ondet sells his food trading business to embark upon an industrial venture. He sets up an industrial capital goods maintenance unit in Clermont-Ferrand under the name of Slicom. With Michelin and Aubert & Duval as its first customers, the company develops rapidly thanks to the expansion of its know-how which leads to the creation of special purpose machines.
2000: Creation of SECCMAS in the aeronautics sector
The first diversification with the creation of Seccmas (research and construction in metal work and mechanics in the aeronautics and space industry). This unit specialising in metal work, machining, assembly and maintenance of aircraft structures is set up at the end of 2001 on the new industrial zone to the south of the Clermont-Ferrand-Auvergne airport.
2004: Aeronautics Acquisition
DACAR, an Auxerre-based aeronautical engineering company, is taken over and called SM2A (aeronautical and space engineering company). With this acquisition, the group extends its aeronautics offer to the manufacture of mechanical sub-assemblies and surface treatment.
2004: Creation of an industrial integration company
With VINCI Energies Rhône Alpes-Auvergne as an equal shareholder, ISI (industrial integration and solutions) is created to provide comprehensive facility management, from design to commissioning.
Takeover of the Taillandier Ingénierie design office which was integrated into ISI in 2008.
2005: Internationalization
The group gradually asserts its international dimension by the location of its customers (Europe, North America and Asia) and by the implementation of alliances that enable it to operate in emerging countries, particularly India where a project organization is opened in Bangalore to build up a network of subcontractors
2007: Structuring the Slicom group
Creation of the Slicom International holding company containing the group’s management and support services.
Creation of the company Slicom Aéro, resulting from the Merger of the two aeronautical companies SECCMAS and SM2A.
The metal work and mechanics company at the origin of the group is named Slicom Technologies.
2008: Establishing sites in India and Tunisia
The Tunisian company SAT Industrie is created and a 2,000 m2 industrial workshop is opened in an industrial area of Tunis to extend the aeronautical machining and sheet-metal activities.
The subsidiary ISI creates the Indian branch 2IS. The Bangalore-based unit is in charge of monitoring local production and local commercial relations on behalf of the group’s different divisions.
2008: Acquisition in aeronautical services
Acquisition of the aeronautic assets management company AIRSET, with a view to expanding the aeronautics offering and moving towards a comprehensive service in aircraft maintenance and retrofitting.
2009: Acquisition in hydropower
Via its subsidiary ISI, the group offers to buy the assets of the company H3E and the brand AQUALIENNE under which the latter designs and develops hydroelectric eco-turbines. This acquisition is in line with its strategy to diversify into the energy market.
2010: Acquisition in the aeronautic sector
The group takes over the Auvergne Aeraunotic's industrial sites located at Aulnat and Cournon d'Auvergne. This strategic acquisition consolidates his position in sheet metal working, assembly and aeronautical repair in the mind of the major clients. The new company is called Auvergne Aéronautique Slicom.
Thanks to this takeover, the groupe aquires 80% shares of Casablanca Aéronautique.
this company is specialized in the sector of sheet metal working, assembly and surface treatment.
The Slicom Group
The Slicom Group
The Slicom Group
The Slicom Group
The Slicom Group
Figures
FIGURES (2011)
|
Turn Over
|
55 M€ |
| Manpower Fance |
535 |
Manpower Morocco
|
180
|
Own Capital
|
10 M€
|
| Investments |
5% TO
|
| Export |
20% TO
|
Factories
|
6 |
A competitive, comprehensive and international offering
Integration, internationalization and diversification are the foundations of our development strategy.
Providing comprehensive services to meet all requirements
With mechanics as its core business, the Slicom group is a global integrator of industrial goods and services which provides comprehensive services to meet all requirements, from design to maintenance.
To provide this comprehensive service, the group draws on the skills and equipment of its own units and on a network of French and foreign partners known for their technological know-how and competitiveness.
With its expertise in engineering, industrialisation, production (machining, metal work, mechanised welding), special processes, surface treatments, assembly and repairs – as well as in the supply chain, the Slicom group proposes a secure, turnkey offering of goods and services.
Producing, buying and selling all over the world
Slicom group’s development strategy is based on the internationalization of its markets, its suppliers and its production sites.
Our customers and delivery sites are spread out in many European countries - France, Spain, Italy, Germany, England, Poland and Romania – but also in China, India Canada and Latin America.
Our international competitiveness is based on three key factors: our purchase and logistics engineering, our low and middle cost production capacities in India and Tunisia and our specialised French units which ensure the security of production in emerging countries.
In the coming years, to continue supporting its customers in all parts of the world and offer them optimal production costs, the group is planning to set up more international sites and partnerships, particularly in the Americas.
Diversifying customer sectors
The Slicom group intends to continue its diversification policy in order to take advantage of the opportunities offered by growth sectors such as energy, railways, defence, etc.
Its five-year business plan reflects the group’s desire to enter the nuclear energy sector and considerably strengthen its position there. It eventually hopes to devote a quarter of its activity to this sector.
For this purpose, the group shall engage in growth by acquisition in order to upgrade its current know-how, particularly in the machining and assembling of large sized parts, by bringing in skills that are specific to this field of activity.
Slicom Group's Enduring Purpose
The Slicom group has given itself a clear set of values on which to forge its identity.
All Slicom staff strive to achieve shared objectives.
Slicom's staff, at all levels of responsibility, undertake to apply these values and pursue these objectives, in their day-to-day work, to gain and maintain customers' trust.
OUR VALUES
Team spirit: understanding and respect of others and ideas, sharing know-how, solidarity, with the need for reliability, mutual trust and cohesion.
Ongoing improvement: commitment, individuals and teams surpassing themselves, requiring a capacity for hard work, ability to challenge and to use one’s initiative.
Sense of responsibility: responsibility for oneself, one's decisions and actions; responsibility to customers, suppliers and company partners; responsibility to the company and the environment.
OUR SHARED OBJECTIVES
Organisational efficacy: constantly mobilise all competences within the company to provide industrial goods and services at optimal cost and efficiency.
Commercial performance: provide a competitive offering in terms of price, elapsed time and quality, while ensuring a profit, customer loyalty and enhanced commercial standing of the company.
Sustainable growth: assess each decision in terms of its contribution to the company's medium- and long-term growth, to ensure its sustainable success.
OUR SHARED DUTY
Customer satisfaction: ensure customer satisfaction while respecting our values and achieving our objectives.
Integrator of industrial products and services
Slicom Group is a mechanical integrator who ensure a full management of your request, from design up to maintenance.
It is developing its activity in the main fields of aircraft industry and space, industrial goods production and energy industries.
Know how from production to maintenance
The offer of the group:
- Engineering, international sourcing, design leadership, project management
Best cost process
Its knowledge and manufacturing means in its premises in France and Abroad, added to its design, manufacturing engineering and international sourcing capabilities, allow an optimum technical reply and competitive trade.
An independant group
His strong and independent financial structure gives good possibility of development supporting its clients in their industrial strategy and in their way to reduce cost as well.
OPTIPOA
Slicom Group and his board have always been taking care about employees's well being. The OPTIPOA action isn't going to break this strong commitment that we have decided long time ago:
"Ensure ourselves that our employees fell confortable at work"
OPTIPOA or "Optimize the purchasing power" contributes to life conditions improvements by offering discounts and special opportunities on several services, from food to fuel.
The idea is from Marcel LALITTE, director of human ressources, and his team is attracting more and moe people.
download Optipoa presenation or reach the website: www.optipoa.fr
Repair of metallic and composite aeronautic structures
Slicom Aero business unit of Clermont-Ferrand works on all sort of metallic and composite structures of civil and military aircrafts. Our team works on removed parts as well as on aircraft itself, in worshop and on customer site, 24 H a day all over the world.
Maintenance
On whole aircraft A1, A2, A3
Repair
Remove, refurbishing of metallic and composite elements: inspection, sheet metal working, riveting, welding, blasting, protection, painting...eccording actual standarts
- On removed elements
- On aircraft
- In workshop
- On customer site over the world
Main activity
- C4 Doors and Hatches
- C6 Equipments
- C7 Engine-APU
- C8 Flight controls
- C20 Fuselage, pylons, wings
Mechanical components for the nuclear industry
Our subsidiary, Slicom Technologies, manufactures mechanically welded and/or machined components for order providers and equipment manufacturers in the nuclear industry.
Slicom Technologies is specialised in industrial sheet metal work, machining and mechanised welding, and holds the skills and resources required to satisfy the demanding standards which apply in the sector (WPQR, certificates, NDT, inspections).
Manufacture of machined or mechanically welded parts
- Precision machining from small to large size
- Fabrication
- Surface preparations and finishing (sand blasting, painting...)
Management of nuclear qualification requirements
- Material certificates
- NDT
- Welding Procedure Qualification Records (WPQR) according to ISO 15614
Accreditations, certifications, qualifications
Quality assurance and certification
ISO 9001 : 2000
- Slicom Aéro Auxerre
- Slicom Aéro Clermont-Ferrand
- Slicom Technologies : in process (End 2009)
EN 9100 : 2003
- Slicom Aéro unité Auxerre
- Slicom Aéro unite Clermont-Ferrand
AQAP 2120
- Slicom Aéro Clermont-Ferrand
Maintenance and repair accreditations
Part 145
- Slicom Aéro Clermont-Ferrand
FAR 145
- Slicom Aéro unité Clermont-Ferrand : in process
NADCAP accreditation
Heat treatments: Slicom Aéro Clermont-Ferrand in process
Aeronautical special processes
Our aeronautical special processes are qualified by all the majors in the aircraft industry and aerospace:
- Material procurement
- NDT
- Heat treatments
- Surfacetreatments
- Assembly
- Forming processes
- Etc…
AIRBUS, AIRBUS TRANSPORT INTERNATIONAL , ALCAN, BOMBARDIER, CAC, EUROCOPTER,
EXAMECA, FIGEAC AERO, LATECOERE, MESSIER DOWTY, RATIER FIGEAC, SOGERMA
…
Welding for nuclear, aerospace, naval industries…
- norme NF EN ISO 15614
- norme NF EN 288
Research consultancy
- Design works: mechanics, automation, electro-pneumatics
-
CAD,CAM: AUTOCAD Mechanical, CATIA V5, ESPRIT, GOelan, H2, MISSLER, SMARTCAM, VERICUT, SOLIDWORKS, TOPSOLID, COSMOS
-
Hydraulic design: ANSYS/CFX
-
Concurrent engineering:PI3C
Integrator of industrial products and services
Slicom Group is a mechanical integrator who ensure a full management of your request, from design up to maintenance.
It is developing its activity in the main fields of aircraft industry and space, industrial goods production and energy industries.
Know how from production to maintenance
The offer of the group:
- Engineering, international sourcing, design leadership, project management
Best cost process
Its knowledge and manufacturing means in its premises in France and Abroad, added to its design, manufacturing engineering and international sourcing capabilities, allow an optimum technical reply and competitive trade.
An independant group
His strong and independent financial structure gives good possibility of development supporting its clients in their industrial strategy and in their way to reduce cost as well.
Large size machining for aircraft industry and aerospace
The manufacturing of large size aeronautical and spatial parts is the speciality of our units of Clermont-Ferrand (Slicom Aero and Slicom Technologie) and Auxerre. These have infrastructures of big capacity as well as equipments of lifting and handling adapted. The work experience of our teams and the specificity of our technological means in mechanical manufacturing make the added value of our services.
Large size machining
- CNC milling, 4 and 5 axes, up to 8000 X 1500 X 1500
- CNC milling single and double spindle, 3 axes, up to 15000 X 1500 X 1500
- CNC horizontal turning, up to Ø 800 X 4700
- CNC vertical turning including milling operation, up to Ø 3000 X 1800
Materials: Steels, aluminium, titanium, inconel, axon
CMM Inspection
strokes up to 5000 X 2700 X 2100
Design and produce of aeronautical toolings
Our subsidary ISI design and produce specific toolings and test benches for civil and military aviation, armament and aerospace industries. Its teams will suggest you reliable and innovative technical solutions to optimise the production costs. A global offer for a turnkey service.
Production toolings for elementary parts / Kitting
- Awl / Matrix
- Machining fixture / Welding
- Inspection toolings, template
- Sticking toolings (Aluminium, composite,...)
Assembly toolings for subsets
- Assembly toolings for structure (composite and aluminium assembly panel)
- C-Scan inspection toolings
- Painting toolings, handling system and trolleys
- Assembly toolings for engines
- Drilling tooling
Assembly lines for final assemblies
- Manual, semi-automated, full automated, robotised, ...
Parts and mechanical or structure assemblies
For more than 40 years,our unit of AUXERRE is the supplier of the majors in the aircraft industry and aerospace field. Precision machining, surface treatments and assemby are the get in specialities of Slicom Aero-SM2A which produce parts,
sub-assemblies and mechanical or structure assemblies "ready to fly".
The capacities of manufacturing of our Tunisian subsidiary allow Slicom Aéro to produce in the best cost.
Precision machining
- High speed machining 5 axes
- Turning with C and Y axes
Materials: Aluminium, steels, titanium, stainless steel, specific materials (Inconel®, Axon®…)
Inspection - NDT - Tests
- NDT: penetrant inspection, magnetic particle inspection
- Corrosion tests, painting quality, salt spray test, water resistance, copper sulfate test, thin layer measurement...
Surface treatments
- Nitric passivation (Austenitic SS)
Assembly
- Fitting: Bushes, bearings, swivel...
- Hydraulic sub assembly (test on 350 bars test bench)
Sheet metal works for aircraft industry and aerospace
Our unit of CLERMONT-FERRAND, Slicom Aero-Seccmas,is specialized in large size machining, sheet metal working, and assy.
Its ability and technologic means connected with the control of additional knowledge place Slicom Aero as a global partner in the civil and military aeronautics fields.
The capacities of manufacturing of our Tunisian subsidiary allow Slicom Aéro to produce in the best cost.
Cutting
Heat treatment
-
Preservation in cold chamber
Forming processes
Surface treatments
Assembly
-
Aircrafts structures sub assemblies and assemblies
-
Management of work package
Customers and aircrafts manufacture programmes
Manufacturers
AEROLIA, AIRBUS, ALCAN, AUBERT & DUVAL, CAC (Chine), EADS-CAL
(Canada), EADS-SOGERMA, CRYOSPACE, DASSAULT-AVIATION, DAHER, DGA (AIA),
EUROCOPTER, EXAMECA, FIGEAC-AERO, HAL (Inde), IAI (ISRAEL)), IRKUT
(Russie), LATECOERE, MECACHROME, MECAHERS, MESSIER- BUGATTI,
MESSIER-DOWTY, NSE- Intégration, RATIER-FIGEAC, REGIONAL-CAE, SADAM,
SAFRAN, SIAé…
Aircrafts manufacture programmes
A320, A330, A340, A380, A 400M,
ARIANE 5
FALCON 200, FALCON 900, DASSAULT F7X, RAFALE
ATR 42, ATR 72
SUPER PUMA, DAUPHIN, ECUREUIL
aerostructure assembly
Aerostructure subsets assemblies, from the simplest to teh most complex, by integrating the configuration management is one key field of Auvergne Aeronautique Slicom (AAS)'s know how. Riveting, fastening, sealents setting up, sticking ... are ones of the numerous processes well controlled for which AAS has qualifications from great aeronautical companies such as EUROCOPTER, AIRBUS, AIRCELLE, DASSAULT...
Aeronautic programs
Programs
Slicom Group partcipates to numerous aeronautic programs in aeronautic maintenance and manufacturing.
Eurocpter Super puma, écureuil, dauphin, Falcon 7X or 900, airbus A320, A330, A340, A380, ATR 42 or 72 are some of these programs as examples.
click to get a better idea about what we do on these programs.
Civil and military aviation
Military aircrafts
SEM, PUMA, ATL 2
TRANSLL, ALPHAJET, C130
Civil aircrafts
AIRBUS: A 320
ATR: 42, 72
BEECH: Full range
BOEING: B 737
CESSNA: CITATION
DORNIER
EMBRAER: E 120, E 135, E 145, E 170, E 190
FALCON
FOKKER: F 100, F 28, F 70
History of the Slicom Group
The Slicom family group was created by Thierry ONDET who is the principal shareholder.
1995: Creation of SLICOM (Engineering Industry Laser Sandblasting)
Thierry Ondet sells his food trading business to embark upon an industrial venture. He sets up an industrial capital goods maintenance unit in Clermont-Ferrand under the name of Slicom. With Michelin and Aubert & Duval as its first customers, the company develops rapidly thanks to the expansion of its know-how which leads to the creation of special purpose machines.
2000: Creation of SECCMAS in the aeronautics sector
The first diversification with the creation of Seccmas (research and construction in metal work and mechanics in the aeronautics and space industry). This unit specialising in metal work, machining, assembly and maintenance of aircraft structures is set up at the end of 2001 on the new industrial zone to the south of the Clermont-Ferrand-Auvergne airport.
2004: Aeronautics Acquisition
DACAR, an Auxerre-based aeronautical engineering company, is taken over and called SM2A (aeronautical and space engineering company). With this acquisition, the group extends its aeronautics offer to the manufacture of mechanical sub-assemblies and surface treatment.
2004: Creation of an industrial integration company
With VINCI Energies Rhône Alpes-Auvergne as an equal shareholder, ISI (industrial integration and solutions) is created to provide comprehensive facility management, from design to commissioning.
Takeover of the Taillandier Ingénierie design office which was integrated into ISI in 2008.
2005: Internationalization
The group gradually asserts its international dimension by the location of its customers (Europe, North America and Asia) and by the implementation of alliances that enable it to operate in emerging countries, particularly India where a project organization is opened in Bangalore to build up a network of subcontractors
2007: Structuring the Slicom group
Creation of the Slicom International holding company containing the group’s management and support services.
Creation of the company Slicom Aéro, resulting from the Merger of the two aeronautical companies SECCMAS and SM2A.
The metal work and mechanics company at the origin of the group is named Slicom Technologies.
2008: Establishing sites in India and Tunisia
The Tunisian company SAT Industrie is created and a 2,000 m2 industrial workshop is opened in an industrial area of Tunis to extend the aeronautical machining and sheet-metal activities.
The subsidiary ISI creates the Indian branch 2IS. The Bangalore-based unit is in charge of monitoring local production and local commercial relations on behalf of the group’s different divisions.
2008: Acquisition in aeronautical services
Acquisition of the aeronautic assets management company AIRSET, with a view to expanding the aeronautics offering and moving towards a comprehensive service in aircraft maintenance and retrofitting.
2009: Acquisition in hydropower
Via its subsidiary ISI, the group offers to buy the assets of the company H3E and the brand AQUALIENNE under which the latter designs and develops hydroelectric eco-turbines. This acquisition is in line with its strategy to diversify into the energy market.
2010: Acquisition in the aeronautic sector
The group takes over the Auvergne Aeraunotic's industrial sites located at Aulnat and Cournon d'Auvergne. This strategic acquisition consolidates his position in sheet metal working, assembly and aeronautical repair in the mind of the major clients. The new company is called Auvergne Aéronautique Slicom.
Thanks to this takeover, the groupe aquires 80% shares of Casablanca Aéronautique.
this company is specialized in the sector of sheet metal working, assembly and surface treatment.
Large size machining for aircraft industry and aerospace
The manufacturing of large size aeronautical and spatial parts is the speciality of our units of Clermont-Ferrand (Slicom Aero and Slicom Technologie) and Auxerre. These have infrastructures of big capacity as well as equipments of lifting and handling adapted. The work experience of our teams and the specificity of our technological means in mechanical manufacturing make the added value of our services.
Large size machining
- CNC milling, 4 and 5 axes, up to 8000 X 1500 X 1500
- CNC milling single and double spindle, 3 axes, up to 15000 X 1500 X 1500
- CNC horizontal turning, up to Ø 800 X 4700
- CNC vertical turning including milling operation, up to Ø 3000 X 1800
Materials: Steels, aluminium, titanium, inconel, axon
CMM Inspection
strokes up to 5000 X 2700 X 2100
Global project management with a unique contact
From the design up to the commissioning and production start up of your installation, our
subsidiary ISI brings you THE global solution and is your unique contact.
Our core business: Special machines, production lines, automatic handling.
ISI keeps the total control of your project thanks to skills of Slicom Group and his qualified network of partners having know-how in mechanics, piping, climatic, electricity and robotics.
A global offer for a turnkey service
- Expertise of project: needs analysis
- Value analysis, costs optimization
- Technical studies: mechanical engineering, electro pneumatic engineering, automation
- Design: custom made solution with the technical specifications, the whole definition of the installation and maintenance manual
- Achievement: mechanical, electrical and pneumatic equipments; maintenance
- Finalizing: assembly, perform test runs and adjustments
- Logistic: packing and conditioning, national and international transport
- Local skills support, to optimize and start the installations and to set up after sales service
- On customer site commissioning: starting up, technical assistance, training, ramp-up assistance
A Unique contact
The mission of the ISI project manager, your unique contact is:
- To generate a production schedule
- To plan tasks and manage the resources
- To establish regular reports of the activities
- To centralize all information inherent to the project
He guarantees the success of your project.
AQUALIENNE® eco-turbine
Our subsidiary,
ISI, develops and manufactures AQUALIENNES®, a new patented process for low-head hydro-electrical eco-turbines.
The performances and ecological benefits of these "green turbines" can be used on many public and private sites to generate electricity: streams, windmills, former factories, canals, reaches, etc.
The AQUALIENNE® process can provide homes and public authorities with an innovative, effective and long-term solution for hydro-electric production using a free and renewable energy source.
ECOLOGICAL hydroelectric turbine
- Slow rotation of approximately 12 rpm ensures that fish can pass through unharmed.
- Integrated device for the evacuation of canal bed silt.
AQUALIENNE® eco-turbines protect fauna and flora without fail. They are designed to meet current environmental requirements and future changes to these requirements.
COST-SAVING hydroelectric turbine
Head: approx. 1 - 3m
Flows of approx. 1 - 15 m3/s
Canal width: 2 - 6 m
Capacity installed: 20 - 300 KW
- Authorisation not required for installation on existing sites with current and uninterrupted dam rights (former factories and windmills) according to the French water law
- Operation from the first KW/H maintaining the production of electricity in periods of low water flow (via compensation water)
- Integrated regulation of compensation and discharged water; automated management with remote control via an Internet connection
- Connection to the ERDF network with sale of electricity
The reliability and yield of AQUALIENNE® eco-turbines can ensure a return on investment over twelve to fifteen years
(depending on the equipment installed; on the basis of current EDF rates).
OUR SERVICES
- Feasibility, technical studies, design and sizing studies
- Manufacture, assembly, transport, on-site installation, commissioning
Aeronautic special processes 1
|
AIRBUS
|
NORM
|
STATE
|
NOTES
|
B U
|
|
LIQUID PENETRANT TEST
|
IGC 04.25.100 / 101/ 102
|
Q
|
|
SM2A |
|
MAGNETIC PARTICLE INSPECTION
|
IGC 04.25.105
|
Q
|
|
SM2A |
|
STAINLESS STEEL - PASSIVATION CONTROL - SALT SPRAY TEST
|
IGC 04.24.122
|
Q
|
|
SM2A |
|
PURCHASING/ APPROVISIONNEMENT MATIERES
|
E.0016.1.0
|
Q
|
thick plates - thon sheets - bar and scew
|
SM2A |
|
ALUMINIUM ALLOYS PART FINISHING (DEBURRING,ANGLE SHELVING) TRIBOFINISHING
|
ADET 0031
|
Q
|
|
SM2A |
|
FORMAGE & CONFORMAGE PAR FLEXION 3 PTS DES MATERIAUX METALLIQUES
|
ADET 0237
|
Q
|
|
SM2A |
|
OAC OF 'ALUMINIUM ALLOYS+ PAINTING
|
ADET 0072 et ADET0071
|
Q
|
|
SM2A |
|
FITTING OF TIGHT ASSEMBLED RINGS
|
ADET 0173
|
Q
|
|
SM2A |
|
LOCTITE SEALING RINGS - BEARING - BALL
|
ADET 0033
|
Q
|
|
SM2A |
|
METALLIZATION
|
AIPS 07.01.006
|
Q
|
|
SM2A |
|
SEALANTS APPLICATION
|
ADET 0082
|
Q
|
|
SM2A |
|
STRUCTURAL RIVETING
|
ADET 0078
|
Q
|
RESTRICTION : only up to 4.0 diameter
|
SM2A |
| CHROMATIC RETOUCH |
ADET 0175 et ADET 0071
|
Q
|
|
SM2A |
|
MOUNTING BY CRIMPING AND BALL BEARING
|
ADET 0191
|
Q
|
RESTRICTION : wheel crimping
|
SM2A |
|
ALUMINIUM ALLOYS HEAT TREATMENT
|
AIPS 04.01.001
|
Q
|
through Figeac AeroMV/ME06
|
SECCMAS |
|
LASER CUTTING
|
AIPS 043.09.001
|
Q
|
through Figeac AeroMV/ME06
|
SECCMAS |
|
PURCHASING/ MATERIAL SUPPLY
|
E0016-1.0
|
Q
|
Q1 : CMS 1, 2, 3, 5 et 7
|
SECCMAS |
| |
|
|
|
|
|
AIRBUS Transport International
|
NORM
|
STATE
|
NOTE
|
BU
|
|
MANUFACTURING : MANUFACTURING, ASSEMBLY AND MECHANIC AND PLATE MOUNTING
REPAIR : STRUCTURAL PARTS
|
MOP ATI
|
Q
|
following MOE SLICOM AERO SECCMAS
|
SECCMAS |
| |
|
|
|
|
ALCAN
|
NORM
|
STATE
|
NOTE
|
BU
|
|
TRIMMING - NC DRILLING
|
GS3-31, GS3-35
|
Q
|
|
SECCMAS |
| |
|
|
|
|
|
CAC
|
NORM
|
STATE
|
NOTE
|
BU
|
|
PURCHASING AND DRAFTS RECEIPT
|
|
Q
|
|
SM2A
|
Purchasing and logistic department
Our purchasing and logistic department works in a design to cost logic, respecting reliability, safety and quality during the manufacturing process. He built a network of recognized partners in France and abroad.He guarantees good execution of conditioning of your product and is able to deliver all around the world.
- Optimization of costs and flow
-
National and international network of logistic means
-
Packaging, conditioning and transport any modes
-
Best cost sourcing for manufacturing:
Low cost : India
Middle cost : Eastern Europe, North Africa
France and Western Europe
Repair of metallic and composite aeronautic structures
Slicom Aero business unit of Clermont-Ferrand works on all sort of metallic and composite structures of civil and military aircrafts. Our team works on removed parts as well as on aircraft itself, in worshop and on customer site, 24 H a day all over the world.
Maintenance
On whole aircraft A1, A2, A3
Repair
Remove, refurbishing of metallic and composite elements: inspection, sheet metal working, riveting, welding, blasting, protection, painting...eccording actual standarts
- On removed elements
- On aircraft
- In workshop
- On customer site over the world
Main activity
- C4 Doors and Hatches
- C6 Equipments
- C7 Engine-APU
- C8 Flight controls
- C20 Fuselage, pylons, wings
Manpower and equipments
Workshop and equipments
- Workshop : 1000 M2
- Storage area
- Dedicted area for blasting and protection
- Paint closed zone
- Special vehicules equiped for on site maintenance and repair
Certifications and approvals
- ISO 9001
- PART 145
- AQAP 2120
Civil and military aviation
Military aircrafts
SEM, PUMA, ATL 2
TRANSLL, ALPHAJET, C130
Civil aircrafts
AIRBUS: A 320
ATR: 42, 72
BEECH: Full range
BOEING: B 737
CESSNA: CITATION
DORNIER
EMBRAER: E 120, E 135, E 145, E 170, E 190
FALCON
FOKKER: F 100, F 28, F 70
The Slicom Group
Manpower and equipments
Workshop and equipments
- Workshop : 1000 M2
- Storage area
- Dedicted area for blasting and protection
- Paint closed zone
- Special vehicules equiped for on site maintenance and repair
Certifications and approvals
- ISO 9001
- PART 145
- AQAP 2120
Sheet metal works for aircraft industry and aerospace
Our unit of CLERMONT-FERRAND, Slicom Aero-Seccmas,is specialized in large size machining, sheet metal working, and assy.
Its ability and technologic means connected with the control of additional knowledge place Slicom Aero as a global partner in the civil and military aeronautics fields.
The capacities of manufacturing of our Tunisian subsidiary allow Slicom Aéro to produce in the best cost.
Cutting
Heat treatment
-
Preservation in cold chamber
Forming processes
Surface treatments
Assembly
-
Aircrafts structures sub assemblies and assemblies
-
Management of work package
Design & achievement of special machines
Our design department - 30 engineers - conceives simple, reliable and innovative special machines who are produced in the best cost by our factories and our partners in France and abroad.
- Production in France and in low cost countries
- Installation and commissioning on customer site
Special processes 2
|
EUROCOPTER
|
NORM
|
STATE
|
NOTE
|
B U |
|
ALODINE 1200 (Aluminium Chromating)
|
MP62-41-10
|
Q
|
Classe 2 parts |
SM2A |
|
PAINT PROTECTION
|
IFMA389 - 447 -195
|
Q
|
Classe 2 parts |
SM2A |
|
TTS PROTECTION OAC (Chromic Acid Anodizing)
|
IFMA 826
|
Q
|
Classe 2 parts |
SM2A |
|
CND RESSUAGE (Fluorescent penetrant inspection)
|
IGC 04-25-100
|
Q
|
Classe 2 parts |
SM2A |
| |
|
|
|
|
|
EXAMECA
|
NORM
|
STATE
|
NOTE
|
B U
|
|
aluminium alloys heat treatment
|
AIPS 04.01.001
|
Q
|
|
SECCMAS
|
|
aluminium alloys heat treatment
|
DGQT1000031K |
Q
|
|
SECCMAS
|
| |
|
|
|
|
|
FIGEAC AERO
|
NORM
|
STATE
|
NOTE
|
B U
|
|
aluminium alloys heat treatment
|
AIPS 04.01.001
|
Q
|
AIRBUS parts
|
SECCMAS
|
|
aluminium alloys heat treatment
|
AIPS 03.09.001
|
Q
|
AIRBUS parts – following annex9.5 du rapport QSP/03
|
SECCMAS |
| |
|
|
|
|
|
LATECOERE
|
NORM
|
STATE
|
NOTE
|
B U
|
|
aluminium alloys heat treatment
|
DGQT1000031K
|
Q
|
Revenu – Four CFR HPM 230 n°1162
|
SECCMAS
|
| |
|
|
|
|
|
MECAHERS
|
NORM
|
STATUT |
NOTE |
B U |
|
TIG WELDING
|
ADET0203 et ADET0074
|
Q
|
3rd degree welding
|
SECCMAS |
| |
|
|
|
|
|
MESSIER DOWTY
|
NORM |
STATE |
NOTE |
B U |
|
MAGNETIC PARTICLE CONTROL
|
IFC 40-052-01 MD
|
Q
|
|
SM2A
|
|
DEFAULTS DETECTION BY LIQUID PENETRANT TEST
|
IFC 40-054-01 MD
|
Q
|
|
SM2A
|
|
STAIBLESS THR MACHINING - ATTAQUE NITAL
|
IFC 40-501-01 MD
|
Q
|
|
SM2A
|
|
STEEL EXPANSION HEAT TREATMENT
|
IFC 40-606-01 MD
|
Q
|
|
SM2A
|
|
CHROMIC ANODIZATION
|
IFC 40-761-02 MD
|
Q
|
|
SM2A
|
|
PRESS FIT BY THERMAL DIFFERENCE
|
IFC 60-312-01 MD
|
Q
|
|
SM2A
|
|
TRAITEMENT CHIMIQUE DE PROTECTION DES ALLIAGES D'ALUMINIUM
|
PCS 2220 Type 1
|
Q
|
|
SM2A
|
|
POLYURETHANE BILAYER PAINT
|
PCS 2500
|
Q
|
|
SM2A
|
| |
|
|
|
|
|
RATIER FIGEAC
|
NORM
|
STATE
|
NOTE
|
B U
|
|
AFA et AFOPRO-RF-00 parts manufacturing
|
PRO-RF-0028
|
Q
|
|
SM2A
|
|
OAC + PAINT
|
MP44.056.00-MP44.491.00
|
Q
|
|
SM2A
|
|
ALODINE 1200 CHROMATIZATION
|
MP44.041.00
|
Q
|
|
SM2A
|
|
ALODINE 1200 RETOUCH
|
MP44.395.00
|
Q
|
|
SM2A
|
|
PEINTURE + MARQUAGE DES PIECES ELEMENTAIRES
|
MP44.491.00
|
Q
|
|
SM2A
|
|
MAGNETIC PARTICLE CONTROL
|
|
Q
|
|
SM2A
|
|
LIQUID PENETRANT TEST
|
IGC.07.BM.542
|
Q
|
|
SM2A
|
|
HARDNESS CONTROL
|
IGC.07.J2068
|
Q
|
|
SM2A
|
|
CONDUCTIVITY CONTROL
|
IGC.07.J2065
|
Q
|
|
SM2A
|
| |
|
|
|
|
|
RECAERO
|
NORME
|
STATE
|
NOTE
|
B U
|
|
ALUMINIUM ALLOYS HEAT TREATMENT
|
|
Q
|
|
SECCMAS
|
|
TIG WELDING (SNECMA)
|
|
Q
|
|
SECCMAS
|
|
SHEET METAL WORK
|
|
Q
|
|
SECCMAS
|
| |
|
|
|
|
| EADS-SOGERMA |
NORM
|
STATE |
NOTE |
B U
|
|
PURCHASING/ MATERIAL SUPPLY
|
E0016-1.0
|
Q
|
Q1 : CMS 1, 2, 3, 5 et 7
|
SECCMAS
|
|
ALUMINIUM ALLOYS HEAT TREATMENT
|
AIPS 04.01.001
|
Q
|
|
SECCMAS
|
|
LASER CUTTING
|
AIPS 03.09.001
|
Q
|
|
SECCMAS
|
Machining - 65 CNC - 100 Spindles
In addition to the traditional methods that equip our societies, here is a list, not exhaustive, of the means of production implemented in our group:
Large parts machining
- Milling centers 5 axes / Up to 5500 x 3000 x1250 / Up to 18000 rpm
- Milling centers 3 - 4 axes/ Up to 15000 x 2000 x 500 / Up to 8000 rpm
- CNC Horizontal lathes Up to Ø 1500 x 4700
- CNC vertical lathes up to Ø 3000 x 1500 / up to 200 rpm
- 4 axes vertical lathe including milling opération up to Ø 2500 x 1800
- CN boring machines up to 2000x2000x2000
Small and medium parts machining
- Milling centers 5 axes up to 3175 x 1320 x 700 / up to 24000 rpm
- Milling centers 3- 4 axes up to 1800 x 1500 x 920 / up to 15000 rpm
- CN Lathes 6 axes/ Ø 170 - stroke 250 - mandrel 170 / up to 4500 rpm
- CN Lathes 8 axes/ Ø 270 - stroke 1000 - mandrel 192 / up to 5000 rpm
- CN Lathes 3 axes/ Ø 660 - srtoke 1050 / up to 3500 rpm
- EDM up to 700 x 400 x 400
- Aligning machines up to 1200 x 510 x 550 / 3000 rpm
- Grinding machines Ø 300, HP up to 200, EP up to 650
Manufacturing from blue prints
Through its subsidary ISI, Slicom group brings a global solution from the design to the starting of your production all around the world.
Design leadership and project follow-up
As the single point of contact and unique contracting party for the customer, we manage the supply chain, we bring a turnkey service and we engage our responsibility for the good execution of the market : respect of costs, deadlines and quality.
Adaptation and implementation studies
Support of studies - mechanics, electricity, automation, supervision - and adjustments of production lines to site rules and countries standards
Manufacturing in France and low cost production areas
Our production units and our partners, in France and in emerging countries, ensure the manufacture of mechanical, electrical and pneumatic components to provide the best cost.
Integration and tests on our Platform
Our means, energy sources and equipments, are grouped on an integration platform (5000 sq/m²). Our teams realize the assembly, the wiring and commissioning. They validate perform test runs, the quality of the product and optimize the process.
Logistics
Disassembling, packaging and conditioning performed following final destination standards, dispatches all ways (air,rail,sea, road)
On site installation
Management of local teams, set up and ramp up assistance
Design & achievement of special machines
Our design department - 30 engineers - conceives simple, reliable and innovative special machines who are produced in the best cost by our factories and our partners in France and abroad.
- Production in France and in low cost countries
- Installation and commissioning on customer site
Customers markets & references
A wide range of industrial markets
Armament - Automotive - Defence - Packaging - Energy - Railway - Wood industries - Fire industries - Automated handling - Metallurgy - Nuclear industry - Tire industry...
Some our customers references
ACTENIUM, ALCAN, AREVA, AUBERT & DUVAL, CATERPILLAR, DCNS, MBDA,
METSO, MICHELIN, POTAIN-MANITOWOC, ROCKWOOL, ROLLIX-DEFONTAINE, SFU,
SKF, TRELLEBORG, ZF-BOUTHEON ...
Global project management with a unique contact
From the design up to the commissioning and production start up of your installation, our
subsidiary ISI brings you THE global solution and is your unique contact.
Our core business: Special machines, production lines, automatic handling.
ISI keeps the total control of your project thanks to skills of Slicom Group and his qualified network of partners having know-how in mechanics, piping, climatic, electricity and robotics.
A global offer for a turnkey service
- Expertise of project: needs analysis
- Value analysis, costs optimization
- Technical studies: mechanical engineering, electro pneumatic engineering, automation
- Design: custom made solution with the technical specifications, the whole definition of the installation and maintenance manual
- Achievement: mechanical, electrical and pneumatic equipments; maintenance
- Finalizing: assembly, perform test runs and adjustments
- Logistic: packing and conditioning, national and international transport
- Local skills support, to optimize and start the installations and to set up after sales service
- On customer site commissioning: starting up, technical assistance, training, ramp-up assistance
A Unique contact
The mission of the ISI project manager, your unique contact is:
- To generate a production schedule
- To plan tasks and manage the resources
- To establish regular reports of the activities
- To centralize all information inherent to the project
He guarantees the success of your project.
Machines retrofits
-
Analysis on customer site and diagnostic of the opportunity of retrofitting
-
In house expertise: tests, disassembly and quotation
-
Improvement studies: ergonomy, performances, conformity to EEC standards, electrical and automatism updatin
- Renewing: surface treatments (sand blasting, painting)
-
Assemblying, piping, seting and energising
-
Cabling, testing and performance tests
-
Boxing and transport all over the world
-
On site installation up to final production
Mechanical achievements
Since 1995, our subsidary SLICOM TECHNOLOGIES has built a solid reputation for expertise in the various trades of machining, but also other elements. Capability of his teams, large size machinig capacity, premises and know-how in fabrication, Mechanical welding , surface treatments, assembly...put Slicom Technologies as a partner having the highest requirements for nuclear, defence, oil, aerospace industries.
Large parts machining
- CNC milling up to 8000 x 1500 x 1500
- CNC horizontal lathes up to Ø800 x 4700
- 4 axes CNC vertical lathe including milling operation up to Ø3000 x 1800
Small and medium parts machining
- CNC and conventional lathes up to Ø500 X 2000
- CNC and conventional milling up to 1200 x 500 x 500
- Electrical Discharge Machine
Fabrication - Mechanical welding
- Plasma cutting
- Welding (any materials)
- Folding,rolling
- Stabilization
- Assembly
Surface preparation & finishing
- Sand blasting, Shot peening, Shot blasting, Cryogenic cleaning
- PTFE coating
- Painting
- Polishing
- Marking
Assembly - Integration - Tests
- Mechanics
- Electricity
- Automation
- Fluids
- Hydraulics
A competitive, comprehensive and international offering
Integration, internationalization and diversification are the foundations of our development strategy.
Providing comprehensive services to meet all requirements
With mechanics as its core business, the Slicom group is a global integrator of industrial goods and services which provides comprehensive services to meet all requirements, from design to maintenance.
To provide this comprehensive service, the group draws on the skills and equipment of its own units and on a network of French and foreign partners known for their technological know-how and competitiveness.
With its expertise in engineering, industrialisation, production (machining, metal work, mechanised welding), special processes, surface treatments, assembly and repairs – as well as in the supply chain, the Slicom group proposes a secure, turnkey offering of goods and services.
Producing, buying and selling all over the world
Slicom group’s development strategy is based on the internationalization of its markets, its suppliers and its production sites.
Our customers and delivery sites are spread out in many European countries - France, Spain, Italy, Germany, England, Poland and Romania – but also in China, India Canada and Latin America.
Our international competitiveness is based on three key factors: our purchase and logistics engineering, our low and middle cost production capacities in India and Tunisia and our specialised French units which ensure the security of production in emerging countries.
In the coming years, to continue supporting its customers in all parts of the world and offer them optimal production costs, the group is planning to set up more international sites and partnerships, particularly in the Americas.
Diversifying customer sectors
The Slicom group intends to continue its diversification policy in order to take advantage of the opportunities offered by growth sectors such as energy, railways, defence, etc.
Its five-year business plan reflects the group’s desire to enter the nuclear energy sector and considerably strengthen its position there. It eventually hopes to devote a quarter of its activity to this sector.
For this purpose, the group shall engage in growth by acquisition in order to upgrade its current know-how, particularly in the machining and assembling of large sized parts, by bringing in skills that are specific to this field of activity.
Manufacturing from blue prints
Through its subsidary ISI, Slicom group brings a global solution from the design to the starting of your production all around the world.
Design leadership and project follow-up
As the single point of contact and unique contracting party for the customer, we manage the supply chain, we bring a turnkey service and we engage our responsibility for the good execution of the market : respect of costs, deadlines and quality.
Adaptation and implementation studies
Support of studies - mechanics, electricity, automation, supervision - and adjustments of production lines to site rules and countries standards
Manufacturing in France and low cost production areas
Our production units and our partners, in France and in emerging countries, ensure the manufacture of mechanical, electrical and pneumatic components to provide the best cost.
Integration and tests on our Platform
Our means, energy sources and equipments, are grouped on an integration platform (5000 sq/m²). Our teams realize the assembly, the wiring and commissioning. They validate perform test runs, the quality of the product and optimize the process.
Logistics
Disassembling, packaging and conditioning performed following final destination standards, dispatches all ways (air,rail,sea, road)
On site installation
Management of local teams, set up and ramp up assistance
aerostructure assembly
Aerostructure subsets assemblies, from the simplest to teh most complex, by integrating the configuration management is one key field of Auvergne Aeronautique Slicom (AAS)'s know how. Riveting, fastening, sealents setting up, sticking ... are ones of the numerous processes well controlled for which AAS has qualifications from great aeronautical companies such as EUROCOPTER, AIRBUS, AIRCELLE, DASSAULT...
Sheet metal working
Also, in the field of sheet metal working, our company got an expertise by developing itself. Today, we are able to satisfy most of our partner and clients. Here, a partial list about the sheet metal working machining.
Cutting
- Laser cutting 5 axes / 3200x1525x600 / 2500 W
- mechanical cutting 3 axes / 3050x2020x250 / 15kW
- 2D cutting
- deburring
Bending
- Presses up to 400 T – Length up to 5000
- hydraulic presses up to 675 T - 1500x1500
- press elastomer up to 2000 T
Mechanical components for the nuclear industry
Our subsidiary, Slicom Technologies, manufactures mechanically welded and/or machined components for order providers and equipment manufacturers in the nuclear industry.
Slicom Technologies is specialised in industrial sheet metal work, machining and mechanised welding, and holds the skills and resources required to satisfy the demanding standards which apply in the sector (WPQR, certificates, NDT, inspections).
Manufacture of machined or mechanically welded parts
- Precision machining from small to large size
- Fabrication
- Surface preparations and finishing (sand blasting, painting...)
Management of nuclear qualification requirements
- Material certificates
- NDT
- Welding Procedure Qualification Records (WPQR) according to ISO 15614
AQUALIENNE® eco-turbine
Our subsidiary,
ISI, develops and manufactures AQUALIENNES®, a new patented process for low-head hydro-electrical eco-turbines.
The performances and ecological benefits of these "green turbines" can be used on many public and private sites to generate electricity: streams, windmills, former factories, canals, reaches, etc.
The AQUALIENNE® process can provide homes and public authorities with an innovative, effective and long-term solution for hydro-electric production using a free and renewable energy source.
ECOLOGICAL hydroelectric turbine
- Slow rotation of approximately 12 rpm ensures that fish can pass through unharmed.
- Integrated device for the evacuation of canal bed silt.
AQUALIENNE® eco-turbines protect fauna and flora without fail. They are designed to meet current environmental requirements and future changes to these requirements.
COST-SAVING hydroelectric turbine
Head: approx. 1 - 3m
Flows of approx. 1 - 15 m3/s
Canal width: 2 - 6 m
Capacity installed: 20 - 300 KW
- Authorisation not required for installation on existing sites with current and uninterrupted dam rights (former factories and windmills) according to the French water law
- Operation from the first KW/H maintaining the production of electricity in periods of low water flow (via compensation water)
- Integrated regulation of compensation and discharged water; automated management with remote control via an Internet connection
- Connection to the ERDF network with sale of electricity
The reliability and yield of AQUALIENNE® eco-turbines can ensure a return on investment over twelve to fifteen years
(depending on the equipment installed; on the basis of current EDF rates).
OUR SERVICES
- Feasibility, technical studies, design and sizing studies
- Manufacture, assembly, transport, on-site installation, commissioning
Parts and mechanical or structure assemblies
For more than 40 years,our unit of AUXERRE is the supplier of the majors in the aircraft industry and aerospace field. Precision machining, surface treatments and assemby are the get in specialities of Slicom Aero-SM2A which produce parts,
sub-assemblies and mechanical or structure assemblies "ready to fly".
The capacities of manufacturing of our Tunisian subsidiary allow Slicom Aéro to produce in the best cost.
Precision machining
- High speed machining 5 axes
- Turning with C and Y axes
Materials: Aluminium, steels, titanium, stainless steel, specific materials (Inconel®, Axon®…)
Inspection - NDT - Tests
- NDT: penetrant inspection, magnetic particle inspection
- Corrosion tests, painting quality, salt spray test, water resistance, copper sulfate test, thin layer measurement...
Surface treatments
- Nitric passivation (Austenitic SS)
Assembly
- Fitting: Bushes, bearings, swivel...
- Hydraulic sub assembly (test on 350 bars test bench)
Inspection equipments
NDT equipments
- Cabins fo fluorescent penetrant inspection: 1400 x 800 x 600 / Sensivity S2
- Magnetic particle inspection: Length 940 - Ø 120
CMM machines
Others inspection equipments
Accreditations, certifications, qualifications
Quality assurance and certification
ISO 9001 : 2000
- Slicom Aéro Auxerre
- Slicom Aéro Clermont-Ferrand
- Slicom Technologies : in process (End 2009)
EN 9100 : 2003
- Slicom Aéro unité Auxerre
- Slicom Aéro unite Clermont-Ferrand
AQAP 2120
- Slicom Aéro Clermont-Ferrand
Maintenance and repair accreditations
Part 145
- Slicom Aéro Clermont-Ferrand
FAR 145
- Slicom Aéro unité Clermont-Ferrand : in process
NADCAP accreditation
Heat treatments: Slicom Aéro Clermont-Ferrand in process
Aeronautical special processes
Our aeronautical special processes are qualified by all the majors in the aircraft industry and aerospace:
- Material procurement
- NDT
- Heat treatments
- Surfacetreatments
- Assembly
- Forming processes
- Etc…
AIRBUS, AIRBUS TRANSPORT INTERNATIONAL , ALCAN, BOMBARDIER, CAC, EUROCOPTER,
EXAMECA, FIGEAC AERO, LATECOERE, MESSIER DOWTY, RATIER FIGEAC, SOGERMA
…
Welding for nuclear, aerospace, naval industries…
- norme NF EN ISO 15614
- norme NF EN 288
Aeronautic special processes 1
|
AIRBUS
|
NORM
|
STATE
|
NOTES
|
B U
|
|
LIQUID PENETRANT TEST
|
IGC 04.25.100 / 101/ 102
|
Q
|
|
SM2A |
|
MAGNETIC PARTICLE INSPECTION
|
IGC 04.25.105
|
Q
|
|
SM2A |
|
STAINLESS STEEL - PASSIVATION CONTROL - SALT SPRAY TEST
|
IGC 04.24.122
|
Q
|
|
SM2A |
|
PURCHASING/ APPROVISIONNEMENT MATIERES
|
E.0016.1.0
|
Q
|
thick plates - thon sheets - bar and scew
|
SM2A |
|
ALUMINIUM ALLOYS PART FINISHING (DEBURRING,ANGLE SHELVING) TRIBOFINISHING
|
ADET 0031
|
Q
|
|
SM2A |
|
FORMAGE & CONFORMAGE PAR FLEXION 3 PTS DES MATERIAUX METALLIQUES
|
ADET 0237
|
Q
|
|
SM2A |
|
OAC OF 'ALUMINIUM ALLOYS+ PAINTING
|
ADET 0072 et ADET0071
|
Q
|
|
SM2A |
|
FITTING OF TIGHT ASSEMBLED RINGS
|
ADET 0173
|
Q
|
|
SM2A |
|
LOCTITE SEALING RINGS - BEARING - BALL
|
ADET 0033
|
Q
|
|
SM2A |
|
METALLIZATION
|
AIPS 07.01.006
|
Q
|
|
SM2A |
|
SEALANTS APPLICATION
|
ADET 0082
|
Q
|
|
SM2A |
|
STRUCTURAL RIVETING
|
ADET 0078
|
Q
|
RESTRICTION : only up to 4.0 diameter
|
SM2A |
| CHROMATIC RETOUCH |
ADET 0175 et ADET 0071
|
Q
|
|
SM2A |
|
MOUNTING BY CRIMPING AND BALL BEARING
|
ADET 0191
|
Q
|
RESTRICTION : wheel crimping
|
SM2A |
|
ALUMINIUM ALLOYS HEAT TREATMENT
|
AIPS 04.01.001
|
Q
|
through Figeac AeroMV/ME06
|
SECCMAS |
|
LASER CUTTING
|
AIPS 043.09.001
|
Q
|
through Figeac AeroMV/ME06
|
SECCMAS |
|
PURCHASING/ MATERIAL SUPPLY
|
E0016-1.0
|
Q
|
Q1 : CMS 1, 2, 3, 5 et 7
|
SECCMAS |
| |
|
|
|
|
|
AIRBUS Transport International
|
NORM
|
STATE
|
NOTE
|
BU
|
|
MANUFACTURING : MANUFACTURING, ASSEMBLY AND MECHANIC AND PLATE MOUNTING
REPAIR : STRUCTURAL PARTS
|
MOP ATI
|
Q
|
following MOE SLICOM AERO SECCMAS
|
SECCMAS |
| |
|
|
|
|
ALCAN
|
NORM
|
STATE
|
NOTE
|
BU
|
|
TRIMMING - NC DRILLING
|
GS3-31, GS3-35
|
Q
|
|
SECCMAS |
| |
|
|
|
|
|
CAC
|
NORM
|
STATE
|
NOTE
|
BU
|
|
PURCHASING AND DRAFTS RECEIPT
|
|
Q
|
|
SM2A
|
Special processes 2
|
EUROCOPTER
|
NORM
|
STATE
|
NOTE
|
B U |
|
ALODINE 1200 (Aluminium Chromating)
|
MP62-41-10
|
Q
|
Classe 2 parts |
SM2A |
|
PAINT PROTECTION
|
IFMA389 - 447 -195
|
Q
|
Classe 2 parts |
SM2A |
|
TTS PROTECTION OAC (Chromic Acid Anodizing)
|
IFMA 826
|
Q
|
Classe 2 parts |
SM2A |
|
CND RESSUAGE (Fluorescent penetrant inspection)
|
IGC 04-25-100
|
Q
|
Classe 2 parts |
SM2A |
| |
|
|
|
|
|
EXAMECA
|
NORM
|
STATE
|
NOTE
|
B U
|
|
aluminium alloys heat treatment
|
AIPS 04.01.001
|
Q
|
|
SECCMAS
|
|
aluminium alloys heat treatment
|
DGQT1000031K |
Q
|
|
SECCMAS
|
| |
|
|
|
|
|
FIGEAC AERO
|
NORM
|
STATE
|
NOTE
|
B U
|
|
aluminium alloys heat treatment
|
AIPS 04.01.001
|
Q
|
AIRBUS parts
|
SECCMAS
|
|
aluminium alloys heat treatment
|
AIPS 03.09.001
|
Q
|
AIRBUS parts – following annex9.5 du rapport QSP/03
|
SECCMAS |
| |
|
|
|
|
|
LATECOERE
|
NORM
|
STATE
|
NOTE
|
B U
|
|
aluminium alloys heat treatment
|
DGQT1000031K
|
Q
|
Revenu – Four CFR HPM 230 n°1162
|
SECCMAS
|
| |
|
|
|
|
|
MECAHERS
|
NORM
|
STATUT |
NOTE |
B U |
|
TIG WELDING
|
ADET0203 et ADET0074
|
Q
|
3rd degree welding
|
SECCMAS |
| |
|
|
|
|
|
MESSIER DOWTY
|
NORM |
STATE |
NOTE |
B U |
|
MAGNETIC PARTICLE CONTROL
|
IFC 40-052-01 MD
|
Q
|
|
SM2A
|
|
DEFAULTS DETECTION BY LIQUID PENETRANT TEST
|
IFC 40-054-01 MD
|
Q
|
|
SM2A
|
|
STAIBLESS THR MACHINING - ATTAQUE NITAL
|
IFC 40-501-01 MD
|
Q
|
|
SM2A
|
|
STEEL EXPANSION HEAT TREATMENT
|
IFC 40-606-01 MD
|
Q
|
|
SM2A
|
|
CHROMIC ANODIZATION
|
IFC 40-761-02 MD
|
Q
|
|
SM2A
|
|
PRESS FIT BY THERMAL DIFFERENCE
|
IFC 60-312-01 MD
|
Q
|
|
SM2A
|
|
TRAITEMENT CHIMIQUE DE PROTECTION DES ALLIAGES D'ALUMINIUM
|
PCS 2220 Type 1
|
Q
|
|
SM2A
|
|
POLYURETHANE BILAYER PAINT
|
PCS 2500
|
Q
|
|
SM2A
|
| |
|
|
|
|
|
RATIER FIGEAC
|
NORM
|
STATE
|
NOTE
|
B U
|
|
AFA et AFOPRO-RF-00 parts manufacturing
|
PRO-RF-0028
|
Q
|
|
SM2A
|
|
OAC + PAINT
|
MP44.056.00-MP44.491.00
|
Q
|
|
SM2A
|
|
ALODINE 1200 CHROMATIZATION
|
MP44.041.00
|
Q
|
|
SM2A
|
|
ALODINE 1200 RETOUCH
|
MP44.395.00
|
Q
|
|
SM2A
|
|
PEINTURE + MARQUAGE DES PIECES ELEMENTAIRES
|
MP44.491.00
|
Q
|
|
SM2A
|
|
MAGNETIC PARTICLE CONTROL
|
|
Q
|
|
SM2A
|
|
LIQUID PENETRANT TEST
|
IGC.07.BM.542
|
Q
|
|
SM2A
|
|
HARDNESS CONTROL
|
IGC.07.J2068
|
Q
|
|
SM2A
|
|
CONDUCTIVITY CONTROL
|
IGC.07.J2065
|
Q
|
|
SM2A
|
| |
|
|
|
|
|
RECAERO
|
NORME
|
STATE
|
NOTE
|
B U
|
|
ALUMINIUM ALLOYS HEAT TREATMENT
|
|
Q
|
|
SECCMAS
|
|
TIG WELDING (SNECMA)
|
|
Q
|
|
SECCMAS
|
|
SHEET METAL WORK
|
|
Q
|
|
SECCMAS
|
| |
|
|
|
|
| EADS-SOGERMA |
NORM
|
STATE |
NOTE |
B U
|
|
PURCHASING/ MATERIAL SUPPLY
|
E0016-1.0
|
Q
|
Q1 : CMS 1, 2, 3, 5 et 7
|
SECCMAS
|
|
ALUMINIUM ALLOYS HEAT TREATMENT
|
AIPS 04.01.001
|
Q
|
|
SECCMAS
|
|
LASER CUTTING
|
AIPS 03.09.001
|
Q
|
|
SECCMAS
|
Figures
FIGURES (2011)
|
Turn Over
|
55 M€ |
| Manpower Fance |
535 |
Manpower Morocco
|
180
|
Own Capital
|
10 M€
|
| Investments |
5% TO
|
| Export |
20% TO
|
Factories
|
6 |
Machines retrofits
-
Analysis on customer site and diagnostic of the opportunity of retrofitting
-
In house expertise: tests, disassembly and quotation
-
Improvement studies: ergonomy, performances, conformity to EEC standards, electrical and automatism updatin
- Renewing: surface treatments (sand blasting, painting)
-
Assemblying, piping, seting and energising
-
Cabling, testing and performance tests
-
Boxing and transport all over the world
-
On site installation up to final production
Surface treatments & Painting
Surface treatments equipments
- AOC (semi-automatic line): max sizes 1400 X 500 X 700
-
Chromating by alodine 1200: max sizes 1400 X 500 X 450
-
Nitric passivation: max sizes 500 X 400 X 400
Painting equipments
-
Pressurized waterproof cabins included steam room: max sizes 5200 x 5000 x 2000
-
Cabins opened with horizontal ventilation and dry filter: 2000 x 1700 x 1300
-
Others waterproof cabin: 6000 X 2800 X 3000
-
Others opened cabins: 16000 X 5000 X 5000
- Internal laboratory for follow of paint quality and treatments
Equipments for surfaces preparation
-
Cabins for Sand blasting and shot penning:15000 X 5000 X 5000
SLICOM AERO Clermont-Ferrand
SLICOM AERO Clermont-Ferrand
With workshops size of about 5000m² and important handling mean ,SLICOM AERO Clermont Ferrand business unit offers to its clients excellent services.
To know more about SLICOM AERO Clermont Ferrand, do not hesitate to download the business unit sheet on the same page.
key words SLICOM AERO Clermont Ferrand:
aeronautic & spatial sheet metal work; aeronautic maintenance; aerostructures repair; sheet metal parts and subsets; Clermont-Ferrand; aluminium; inox; large size machining;
Research consultancy
- Design works: mechanics, automation, electro-pneumatics
-
CAD,CAM: AUTOCAD Mechanical, CATIA V5, ESPRIT, GOelan, H2, MISSLER, SMARTCAM, VERICUT, SOLIDWORKS, TOPSOLID, COSMOS
-
Hydraulic design: ANSYS/CFX
-
Concurrent engineering:PI3C
Purchasing and logistic department
Our purchasing and logistic department works in a design to cost logic, respecting reliability, safety and quality during the manufacturing process. He built a network of recognized partners in France and abroad.He guarantees good execution of conditioning of your product and is able to deliver all around the world.
- Optimization of costs and flow
-
National and international network of logistic means
-
Packaging, conditioning and transport any modes
-
Best cost sourcing for manufacturing:
Low cost : India
Middle cost : Eastern Europe, North Africa
France and Western Europe
Machining - 65 CNC - 100 Spindles
In addition to the traditional methods that equip our societies, here is a list, not exhaustive, of the means of production implemented in our group:
Large parts machining
- Milling centers 5 axes / Up to 5500 x 3000 x1250 / Up to 18000 rpm
- Milling centers 3 - 4 axes/ Up to 15000 x 2000 x 500 / Up to 8000 rpm
- CNC Horizontal lathes Up to Ø 1500 x 4700
- CNC vertical lathes up to Ø 3000 x 1500 / up to 200 rpm
- 4 axes vertical lathe including milling opération up to Ø 2500 x 1800
- CN boring machines up to 2000x2000x2000
Small and medium parts machining
- Milling centers 5 axes up to 3175 x 1320 x 700 / up to 24000 rpm
- Milling centers 3- 4 axes up to 1800 x 1500 x 920 / up to 15000 rpm
- CN Lathes 6 axes/ Ø 170 - stroke 250 - mandrel 170 / up to 4500 rpm
- CN Lathes 8 axes/ Ø 270 - stroke 1000 - mandrel 192 / up to 5000 rpm
- CN Lathes 3 axes/ Ø 660 - srtoke 1050 / up to 3500 rpm
- EDM up to 700 x 400 x 400
- Aligning machines up to 1200 x 510 x 550 / 3000 rpm
- Grinding machines Ø 300, HP up to 200, EP up to 650
Inspection equipments
NDT equipments
- Cabins fo fluorescent penetrant inspection: 1400 x 800 x 600 / Sensivity S2
- Magnetic particle inspection: Length 940 - Ø 120
CMM machines
Others inspection equipments
Surface treatments & Painting
Surface treatments equipments
- AOC (semi-automatic line): max sizes 1400 X 500 X 700
-
Chromating by alodine 1200: max sizes 1400 X 500 X 450
-
Nitric passivation: max sizes 500 X 400 X 400
Painting equipments
-
Pressurized waterproof cabins included steam room: max sizes 5200 x 5000 x 2000
-
Cabins opened with horizontal ventilation and dry filter: 2000 x 1700 x 1300
-
Others waterproof cabin: 6000 X 2800 X 3000
-
Others opened cabins: 16000 X 5000 X 5000
- Internal laboratory for follow of paint quality and treatments
Equipments for surfaces preparation
-
Cabins for Sand blasting and shot penning:15000 X 5000 X 5000
Auvergne Aéronautique Slicom business Unit
Auvergne Aero Slicom
Auvergne Aero Slicom is divided in two sites with one which is conveniently located near the runway of Aulnat (Clermont-Ferrand) airport. It doesn't leave any mystery about its core business. Aeronautic maintenance, sheet metal work parts and specific piping manufacturing, assembly, surface treatment and painting. the range of AAS skills is large. That's the reason why the most important actors of the field are confident with this company.
The dynamism of this company has been demonstrated by the acquisition ofa new surface treatment line at the state of the art, moreover it's without any pollutant discharge.
Even more, we're extending the workshop of Aulnat. one evidence more of our dynamism.
Mots clés Auvergne Aero Slicom
aeronautic maintenance; aeronautic assembly; aeronautic sheet metal work; surface treatment; painting; auvergne aero; Clermont-Ferrand;
Sheet metal working
Also, in the field of sheet metal working, our company got an expertise by developing itself. Today, we are able to satisfy most of our partner and clients. Here, a partial list about the sheet metal working machining.
Cutting
- Laser cutting 5 axes / 3200x1525x600 / 2500 W
- mechanical cutting 3 axes / 3050x2020x250 / 15kW
- 2D cutting
- deburring
Bending
- Presses up to 400 T – Length up to 5000
- hydraulic presses up to 675 T - 1500x1500
- press elastomer up to 2000 T
Slicom aero Auxerre
SLICOM AERO AUXERRE
Better known as its former name SM2A, Slicom aero Auxerre offers its services the aeronautic field, like Clermont-Ferrand Business unit. With a large range of know how, Slicom Aero Auxerre is able to provide the client from machining up to assembly and surface treatments.
Here, we work on aluminum, stanless steel, titanium or even exotical material such as inconel or axon, for example.
For more information, you can get the "Slicom Aero Auxerre" business sheet by downloading it on this page.
Key words SLICOM AERO AUXERRE
large size machining; precision machining; assembly; aeronautic; spatial; painting; surface treatment; aluminum; inconel; stainless steel; axon; titanium; milling; turning;
Casablanca Aeronautique
Casablanca Aéronautique
Maroccan Auvergne Aeronautique Slicom subsidiary, Casablanca Aéronautique carries on at the aeropole of Mohamed V airport. The assembly or the manufacturing of sheet matal subsets or even the surface treatment are mainly service that Casablanca Aeronautique offers.
Here, we work on aluminum, stainless steel and titanum respecting exigent norms.
To get more details, download the business unit sheet of Casablanca Aeronautique.
key words for Casablanca Aéronautique
aeronautic sheet metal work; Casablanca; Auvergne Aéronautique Slicom; sheet metal assemblies; surface treatment; Marocco
Slicom Technologie
Slicom technologie
Slicom technologie,the first one to make part of Slicom Group, has its activity which tends more toward industrial goods and energy, which has not forbidden it to manufacture parts for Ariane
With well sized workshops, and a material which is at the sate of the art, Slicom "tech" is able to offer these services without any problems:
- small, middle and large size machining
- sheet metal work
- surfaces finitions
- mechanical assemblies
There, they work on aluminum, stainless steel and titanum.
To get more information, download the brochure
Key words Slicom Technologie
large size machinig; small and middle size machining; industrial sheet metal work; surfaces fintions; machanical assemblies
Slicom Group's Enduring Purpose
The Slicom group has given itself a clear set of values on which to forge its identity.
All Slicom staff strive to achieve shared objectives.
Slicom's staff, at all levels of responsibility, undertake to apply these values and pursue these objectives, in their day-to-day work, to gain and maintain customers' trust.
OUR VALUES
Team spirit: understanding and respect of others and ideas, sharing know-how, solidarity, with the need for reliability, mutual trust and cohesion.
Ongoing improvement: commitment, individuals and teams surpassing themselves, requiring a capacity for hard work, ability to challenge and to use one’s initiative.
Sense of responsibility: responsibility for oneself, one's decisions and actions; responsibility to customers, suppliers and company partners; responsibility to the company and the environment.
OUR SHARED OBJECTIVES
Organisational efficacy: constantly mobilise all competences within the company to provide industrial goods and services at optimal cost and efficiency.
Commercial performance: provide a competitive offering in terms of price, elapsed time and quality, while ensuring a profit, customer loyalty and enhanced commercial standing of the company.
Sustainable growth: assess each decision in terms of its contribution to the company's medium- and long-term growth, to ensure its sustainable success.
OUR SHARED DUTY
Customer satisfaction: ensure customer satisfaction while respecting our values and achieving our objectives.
Design and produce of aeronautical toolings
Our subsidary ISI design and produce specific toolings and test benches for civil and military aviation, armament and aerospace industries. Its teams will suggest you reliable and innovative technical solutions to optimise the production costs. A global offer for a turnkey service.
Production toolings for elementary parts / Kitting
- Awl / Matrix
- Machining fixture / Welding
- Inspection toolings, template
- Sticking toolings (Aluminium, composite,...)
Assembly toolings for subsets
- Assembly toolings for structure (composite and aluminium assembly panel)
- C-Scan inspection toolings
- Painting toolings, handling system and trolleys
- Assembly toolings for engines
- Drilling tooling
Assembly lines for final assemblies
- Manual, semi-automated, full automated, robotised, ...
Mechanical achievements
Since 1995, our subsidary SLICOM TECHNOLOGIES has built a solid reputation for expertise in the various trades of machining, but also other elements. Capability of his teams, large size machinig capacity, premises and know-how in fabrication, Mechanical welding , surface treatments, assembly...put Slicom Technologies as a partner having the highest requirements for nuclear, defence, oil, aerospace industries.
Large parts machining
- CNC milling up to 8000 x 1500 x 1500
- CNC horizontal lathes up to Ø800 x 4700
- 4 axes CNC vertical lathe including milling operation up to Ø3000 x 1800
Small and medium parts machining
- CNC and conventional lathes up to Ø500 X 2000
- CNC and conventional milling up to 1200 x 500 x 500
- Electrical Discharge Machine
Fabrication - Mechanical welding
- Plasma cutting
- Welding (any materials)
- Folding,rolling
- Stabilization
- Assembly
Surface preparation & finishing
- Sand blasting, Shot peening, Shot blasting, Cryogenic cleaning
- PTFE coating
- Painting
- Polishing
- Marking
Assembly - Integration - Tests
- Mechanics
- Electricity
- Automation
- Fluids
- Hydraulics
Auvergne Aéronautique Slicom business Unit
Auvergne Aero Slicom
Auvergne Aero Slicom is divided in two sites with one which is conveniently located near the runway of Aulnat (Clermont-Ferrand) airport. It doesn't leave any mystery about its core business. Aeronautic maintenance, sheet metal work parts and specific piping manufacturing, assembly, surface treatment and painting. the range of AAS skills is large. That's the reason why the most important actors of the field are confident with this company.
The dynamism of this company has been demonstrated by the acquisition ofa new surface treatment line at the state of the art, moreover it's without any pollutant discharge.
Even more, we're extending the workshop of Aulnat. one evidence more of our dynamism.
Mots clés Auvergne Aero Slicom
aeronautic maintenance; aeronautic assembly; aeronautic sheet metal work; surface treatment; painting; auvergne aero; Clermont-Ferrand;
Customers markets & references
A wide range of industrial markets
Armament - Automotive - Defence - Packaging - Energy - Railway - Wood industries - Fire industries - Automated handling - Metallurgy - Nuclear industry - Tire industry...
Some our customers references
ACTENIUM, ALCAN, AREVA, AUBERT & DUVAL, CATERPILLAR, DCNS, MBDA,
METSO, MICHELIN, POTAIN-MANITOWOC, ROCKWOOL, ROLLIX-DEFONTAINE, SFU,
SKF, TRELLEBORG, ZF-BOUTHEON ...
SLICOM AERO Clermont-Ferrand
SLICOM AERO Clermont-Ferrand
With workshops size of about 5000m² and important handling mean ,SLICOM AERO Clermont Ferrand business unit offers to its clients excellent services.
To know more about SLICOM AERO Clermont Ferrand, do not hesitate to download the business unit sheet on the same page.
key words SLICOM AERO Clermont Ferrand:
aeronautic & spatial sheet metal work; aeronautic maintenance; aerostructures repair; sheet metal parts and subsets; Clermont-Ferrand; aluminium; inox; large size machining;
Slicom aero Auxerre
SLICOM AERO AUXERRE
Better known as its former name SM2A, Slicom aero Auxerre offers its services the aeronautic field, like Clermont-Ferrand Business unit. With a large range of know how, Slicom Aero Auxerre is able to provide the client from machining up to assembly and surface treatments.
Here, we work on aluminum, stanless steel, titanium or even exotical material such as inconel or axon, for example.
For more information, you can get the "Slicom Aero Auxerre" business sheet by downloading it on this page.
Key words SLICOM AERO AUXERRE
large size machining; precision machining; assembly; aeronautic; spatial; painting; surface treatment; aluminum; inconel; stainless steel; axon; titanium; milling; turning;
OPTIPOA
Slicom Group and his board have always been taking care about employees's well being. The OPTIPOA action isn't going to break this strong commitment that we have decided long time ago:
"Ensure ourselves that our employees fell confortable at work"
OPTIPOA or "Optimize the purchasing power" contributes to life conditions improvements by offering discounts and special opportunities on several services, from food to fuel.
The idea is from Marcel LALITTE, director of human ressources, and his team is attracting more and moe people.
download Optipoa presenation or reach the website: www.optipoa.fr
Customers and aircrafts manufacture programmes
Manufacturers
AEROLIA, AIRBUS, ALCAN, AUBERT & DUVAL, CAC (Chine), EADS-CAL
(Canada), EADS-SOGERMA, CRYOSPACE, DASSAULT-AVIATION, DAHER, DGA (AIA),
EUROCOPTER, EXAMECA, FIGEAC-AERO, HAL (Inde), IAI (ISRAEL)), IRKUT
(Russie), LATECOERE, MECACHROME, MECAHERS, MESSIER- BUGATTI,
MESSIER-DOWTY, NSE- Intégration, RATIER-FIGEAC, REGIONAL-CAE, SADAM,
SAFRAN, SIAé…
Aircrafts manufacture programmes
A320, A330, A340, A380, A 400M,
ARIANE 5
FALCON 200, FALCON 900, DASSAULT F7X, RAFALE
ATR 42, ATR 72
SUPER PUMA, DAUPHIN, ECUREUIL
Casablanca Aeronautique
Casablanca Aéronautique
Maroccan Auvergne Aeronautique Slicom subsidiary, Casablanca Aéronautique carries on at the aeropole of Mohamed V airport. The assembly or the manufacturing of sheet matal subsets or even the surface treatment are mainly service that Casablanca Aeronautique offers.
Here, we work on aluminum, stainless steel and titanum respecting exigent norms.
To get more details, download the business unit sheet of Casablanca Aeronautique.
key words for Casablanca Aéronautique
aeronautic sheet metal work; Casablanca; Auvergne Aéronautique Slicom; sheet metal assemblies; surface treatment; Marocco
Slicom Technologie
Slicom technologie
Slicom technologie,the first one to make part of Slicom Group, has its activity which tends more toward industrial goods and energy, which has not forbidden it to manufacture parts for Ariane
With well sized workshops, and a material which is at the sate of the art, Slicom "tech" is able to offer these services without any problems:
- small, middle and large size machining
- sheet metal work
- surfaces finitions
- mechanical assemblies
There, they work on aluminum, stainless steel and titanum.
To get more information, download the brochure
Key words Slicom Technologie
large size machinig; small and middle size machining; industrial sheet metal work; surfaces fintions; machanical assemblies
Aeronautic programs
Programs
Slicom Group partcipates to numerous aeronautic programs in aeronautic maintenance and manufacturing.
Eurocpter Super puma, écureuil, dauphin, Falcon 7X or 900, airbus A320, A330, A340, A380, ATR 42 or 72 are some of these programs as examples.
click to get a better idea about what we do on these programs.
Careers | Links|Legal Information
SLICOM GROUP
SLICOM International - Zone Aéronautique Sud
149 Avenue du Brézet - 63100 Clermont-Ferrand
Tél. : +33(0)4 73 83 89 80 - Fax : +33(0)4 73 83 89 95
